search

Redline Communications RDL-2000 Manual de usuario Pagina 48

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 51
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
    •
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 47
RDL-2000 User Manual
70-00143-01-01 Proprietary Redline Communications © 2011 Page 48 of 52 March 9, 2011
new_pwd - Enter the new password twice (second entry is for confirmation).
Password changes are saved immediately and do not require the update
command.
Example: Change password to Az123:
[192.168.25.2] >>: pwd Az123 Az123
quit
Exit from this Telnet session.
Important: If required, save parameters before exiting (see update command).
All unsaved changes are discarded.
Example: Exit from this session:
[192.168.25.2] >>: quit
Connection to host has been lost.
rate <dl_rate> <ul_rate>
View or modify the RDL-2000 downlink and uplink rates.
Rate settings are: 0 = BPSK 1/2, 1 = QPSK 1/2, 2 = QPSK 3/4, 3 = 16 QAM 1/2,
4 = 16 QAM 3/4, 5 = 64 QAM 2/3, 6 = 64 QAM 3/4, and 7 = 64 QAM 5/6
dl_rate: Enter the desired maximum downlink modulation/coding for the link.
When Adaptive Modulation is disabled, the RDL-2000 downlink rate is fixed at
this modulation/coding. When Adaptive Modulation is enabled, this setting is
ignored.
ul_rate: Select the desired maximum uplink modulation/coding for the link.
When Adaptive Modulation is disabled, the RDL-2000 uplink rate is fixed at this
modulation/coding. When Adaptive Modulation is enabled, this setting is ignored.
Example: Set the RDL-2000 rate to downlink = 64 QAM 5/6 and uplink = 64 QAM
2/3:
[192.168.25.2] >>: rate 7 5
reset
Reboot the RDL-2000. The current Telnet session will be closed. Unsaved
changes will be discarded.
Example: Reset the RDL-2000:
[192.168.25.2] >>: reset
Connection to host has been lost.
rtext [clear]
View or clear the recorded cause of the last system reset.
[blank] - Display cause of last reset.
clear - Delete the cause of the last reset.
Example: Clear the cause of the last reset:
[192.168.25.2] >>: rtext clear
rssi [clear]
View or enable/disable the RSSI collection settings.
[blank] - Display current mode/setting.
off - Disable RSSI.
on - Enable RSSI.
Example: Read current RSSI value:
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Vista de pagina 47
1 2 ... 43 44 45 46 47 48 49 50 51

Comentarios a estos manuales

Sin comentarios
  • Jdc-electronic-sa Gossen MetraWatt Armodilo AirLiner ARJAY ENGINEERING
  • Infinity No Klipsch Altavoces barra de sonido Aprilaire Bombas de calor Behringer Auriculares Gyration Teclados
  • Jabra 14101-15 Zune CABLE Pack LG RAD114 Samsung VLUU NV20 Kestrel 3500
  • Beurer MG 55 Manual de usuario Pioneer DVR-K06 Manual de usuario Mitsubishi PAR-U02MEDA Manual de usuario Panasonic SCBTT370 Instrucciones de operaciones Electrolux EKC951100W Manual de usuario