Redline Communications RDL-2000 Manual de usuario descargar pdf (Pagina 29)

RDL-2000 User Manual

ETSI: ETSI region. Allowed bands are 5.4 and 5.8 GHz.

Band: Select the band of operation. Identical settings must be used on the Master and

Slave. Changing the RF band will automatically change the following:

Channel Scan list (Slave only)

DFS (Master and Slave)

Fixed Frame Mode

(Master only) Choose the TDD framing mode.

Mode: Use this setting to enable or disable fixed frame mode.

Enable: Use TDD fixed size frame. The UL/DL ratio is fixed at 50/50.

Disable: Use TDD dynamic size frame. The UL/DL ratio is adjusted dynamically

based on current traffic requirements.

Signal Count: Factory test only.

IIS Level: Set the default level at power-on. This value is adjusted automatically during

normal operation. Valid only when IIS is enabled (see 3.6: Link Configuration Screen on

page 30.

Set Default: Click this button to reset the IIS value to the factory default value.

Submit: Click this button to send the current parameter settings on this screen to the

RDL-2000. The RDL-2000 will save these settings in non volatile RAM. All unsaved

changes are discarded when the operator changes to another screen.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 50 51

Sin comentarios

Redline Communications RDL-2000 Manual de usuario Pagina 29