Redline Communications RDL-2000 Manual de usuario descargar pdf (Pagina 36)

RDL-2000 User Manual

3.9 License Screen

Use the License screen to register the license for the RDL-2000. The license feature

controls the band settings based on regulatory requirements (e.g., ETSI, FCC, etc). See

the Band setting in section 3.5: Installation Screen - Advanced Screen on page 26.

Without a license file installed, the default settings are: 10 MHz channel, 5.8 GHz band,

and DFS enabled.

Before entering a license file, the RDL-2000 is operating in a restricted mode and allows

operation only in the 5.8 GHz band. License files are created using the MAC address of

a specific RDL-2000 unit, and the license will be accepted only by an RDL-2000 having

this MAC address. This operation requires a system reboot.

Important: The RDL-2000 must be rebooted at the end of this procedure. This function

should be performed only during installation or a scheduled maintenance window.

Figure 22: Link Mgr - License Screen

License File: Name of the selected license file.

Browse: Click this button to use the system file browser to locate the file on a PC or

network drive. The operator may also drag & drop the file on this screen.

License File Upload Procedure

Use the following procedure to upload a new license file:

1. Login to the RDL-2000 and click License in the main menu (left side of screen).

a) Drag & drop the file onto this screen, or

b) Click the Browse button to locate the file.

2. Verify the MAC address displayed in the Licensed Macs table matches the MAC

address of the connected RDL-2000. The license file is accepted only by an RDL-

2000 having the matching MAC address.

3. Click Submit to upload and activate the license file.

4. Reboot the RDL-2000 to activate the new license file.

5. Close and then re-open the Link Manager application before re-connecting to the

RDL-2000. Confirm the Regulation field (Installation->Advanced screen) indicates

the correct designation (e.g., FCC)

Important: If the license is updated on a remote unit, the wireless connection may be

lost and not be re-established (e.g., allowed operating bands are changed).

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 50 51

Sin comentarios

Redline Communications RDL-2000 Manual de usuario Pagina 36