Redline Communications AN-50e Manual de usuario descargar pdf (Pagina 141)

AN-80i User Manual

9.4.2 5.4 GHz Radio: FCC & IC Antennas

This device has been designed to operate with the antennas listed below, and having a

maximum gain of 22 dBi.

Table 68: Spec. - FCC & IC Certified Antennas: 5.47-5.725 GHz Operation

Redline Order # Gain

(dBi)

Description Tx Power

Setting (dBm)

(Part Number)

10 MHz

20 MHz

40 MHz

A12015EAS

(48-00065-00)

120°, 4.9-5.9 GHz, sector flat panel

A2209MTFW

(48-00071-00)

9°, 4.9-5.875 GHz, sector, flat panel

A36009MMO

(48-00048-01)

360°, 5.0 - 6.0 GHz, omni directional

A6017EAS

(48-00067-00)

17.5 62°, 4.9-5.9 GHz, sector flat panel

7 7 7

A9016EAS

(48-00066-00)

16.6

90°, 4.9-5.9 GHz, sector flat panel

Antennas not included in this list or having a gain greater than 22 dBi are strictly

prohibited for use with this device. The required antenna impedance is 50 ohms. The RF

output power and selection must be professionally programmed and the equipment must

be installed by the manufacturer or a trained professional installer.

9.4.3 5.25 - 5.35 GHz Radio: FCC & IC Antennas

This device has been designed to operate with the antennas listed below, and having a

maximum gain of 22 dBi.

Table 69: Spec. - FCC & IC Antennas: 5.25 - 5.35 GHz Operation

Redline Order #

(Part Number)

Gain

(dBi)

Description App. Tx Power Setting (dBm)

Channel Size

10 MHz 20 MHz 40 MHz

A12015EAS

(48-00065-00)

15 120 deg., .9-5.9 GHz,

sector flat panel

PMP 10 12 13

A2209MTFW

(48-00071-00)

22 9°, 4.9-5.875 GHz, sector, flat

panel

PTP 7 7 7

A36009MMO

(48-00048-01)

9 360°, 5.0 - 6.0 GHz, omni

directional

PMP 10 12 13

A6017EAS

(48-00067-00)

17.5 62 deg., 4.9-5.9 GHz,

sector flat panel

PMP 10 12 12

A9016EAS

(48-00066-00)

16.6 90 deg., 4.9-5.9 GHz,

sector flat panel

PMP 10 12 13

* FCC regulations require the DFS function be permanently enabled at the factory and can not be disabled

by the installer/end-user when operating in the 5.25-5.35 GHz range.

Antennas not included in this list or having a gain greater than 22 dBi are strictly

prohibited for use with this device. The required antenna impedance is 50 ohms. The RF

output power and selection must be professionally programmed and the equipment must

be installed by the manufacturer or a trained professional installer.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 151 152

Comentarios a estos manuales

Sin comentarios

Redline Communications AN-50e Manual de usuario Pagina 141

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Redline Communications AN-50e